Science Diliman, Vol 16, No 2 (2004)

Font Size:  Small  Medium  Large

The Effect of Deposition Time on Textured Magnesium Diboride Thick Films Fabricated by Electrophoretic Deposition

W. G. Mutia, M. S. Romano, R. V. Sarmago

Abstract


MgB2 powders suspended in ethanol were electrophoretically deposited on high-purity molybdenum substrates having dimensions of 1 x 0.3 x 0.01 cm. The said substrate was set as the cathode and was placed 0.5 cm away from a graphite rod anode. A current density of ~0.02 mA/cm2 and a voltage of 600 V were applied. The effect of deposition time was studied by varying it as follows: 15 s, 30 s, 1 min, and 2 min. Heat treatment at 950 oC for 3 h was done after deposition. MgB2 thick films were successfully fabricated for the deposition carried out for 2 min. Deposition times less than 2 min resulted in insufficient deposited powder; hence formation of MgB2 was not facilitated. Films deposited at 15 and 30 s have good surface characteristics, wherein no microcracks were present. X-ray diffraction and surface image analysis reveal that the deposited films have a preferred orientation along the (10l) direction.

Full Text: PDF